Instructions for install wall fan simple without a mechanic

Install wall fan is not a difficult task. However, many people still cannot do this and need to find a mechanic. Therefore, you will lose an additional amount of money to hire an installer. Check out Tran Phat’s guide to save money for yourself.

1.Simple wall fan installation instructions

Wall fan is a product that many people choose in the summer. Installing a wall fan is not too difficult, but not everyone knows how to do it. To save money on hiring a fan to install a fan, see the instructions below.

Preparation stage

To install a wall fan, you need to fully prepare the following tools and equipment: Screws, markers, drills, screwdrivers. These are indispensable tools when installing wall fans. These tools and equipment will make your job easier.

Instructions on how to install a basic wall fan.

The installation of a wall fan will be carried out through the following basic steps:
Step 1: Choose a location and mark: You need to determine a suitable fan installation location, then use a marker to mark on the wall. You need to calculate so that when the fan works, it will achieve the highest efficiency. Note, the height from the fan to the floor should not exceed 2m.

Step 2: Drill and install the fan on the wall: Next, you use the drill to drill a hole to install the screw at the wall position just marked. Use suitable screws to secure the fan from falling.

Step 3: Remove the fan canopy by turning it clockwise.

Step 4: Remove the fan cage canopy: To remove the fan cage canopy you just need to rotate it counterclockwise.

Step 5: Install the rear fan cage and install the fan cage canopy in the correct position.

Step 6: Install the propeller on the fan shaft and then proceed to install the fan canopy on the rotating shaft. You just need to rotate the fan canopy anti-clockwise.

Step 7: Install the frame rim into the fan cage first and then put the fan cage in the correct position to match the rear fan cage.

Step 8: Check the installed fan positions, then plug in the power and turn on the fan for test run.

It can be said that installing a wall fan is not difficult, just a little time and a little ingenuity you can install the fan without asking a mechanic.

2.Things to note when using a wall fan

Wall fan design has its own characteristics. The product is suitable for all spaces of bedrooms, reading rooms, classrooms, motel rooms, etc. has a small size of only 10-20m2. The blade’s span is from 40 to 55cm wide and works with a capacity of 40 to 55W to help save electricity to the maximum. The fan is installed on high so it doesn’t take up a lot of usable area. Moreover, from a high position, the wind creates all the space in the room and is also cooler.

When using and install wall fans to ensure maximum fan efficiency. At the same time to ensure prolonging the life of the fan, you should note the following:

When install wall fan

When Install wall fan, you need to carefully calculate the height of the installation location. It is recommended that you choose a location to install the fan from 2.5m to 2.7m from the floor. At this height, the air and wind in the room will circulate better when the fan is operating. Not only that, this is considered a safe height for users, especially for families with young children.

Note when using

If your room is well ventilated, you should not turn the gear too high. Because you turn the gear too high will cause the temperature of the air to drop very quickly. This is absolutely not good for the health of the user.

It is best to leave the fan in swing mode in many directions. This is to avoid unbalanced room temperature leading to dry skin in both adults and children.
Regularly clean the wall fan to prolong the life of the fan. After a period of use, the wall fan will definitely collect dirt, if not cleaned, the fan will reduce its operating efficiency. The wind is not as cool as before, followed by dust and moldy moisture from the fan, which affects human health.

In winter, when the fan is not in use, clean the fan, apply oil to the motor, then wrap the fan carefully with a plastic bag to ensure that the fan does not collect dust. You can take it apart and store it carefully until next summer to use it again.

Above are the things you need to keep in mind when using a wall fan. Please keep it in mind to ensure a longer product life. Besides, you should also keep in mind how to install a wall fan to install wall fan when summer comes.

See more : Top 5 most popular Yanfan wall fan models Tran Phat

 

FOR MORE INFORMATION PLEASE CONTACT

TRAN PHAT PRODUCTION – TRADING – SERVICE ONE MEMBER CO., LTD
🏢 346A Tan Hoa Dong, Binh Tri Dong Ward, Binh Tan District, City. HCM City
☎️ Hotline: 028.5407.7633 – 28.62695792
📧 Email: tranphat@yanfan.com.vn
🌐 Website: https://tranphat.net.vn
🇫 Fanpage: https://www.facebook.com/congtytranphat
🗾 Maps: https://g.page/r/CaRJcQ1kHoBrEBA