MAINTENANCE AND CLEANING THE FAN RIGHT

After a period of use, your electric fan will cling to dirt that looks very unsightly. Not only that, the fan is also slow to run and the ability to create less wind. That’s when you need to think about carrying out maintenance and cleaning the fan. How to do it, Tran Phat will share with you in the section below.

Mục lục

1. Disconnect the power supply before performing maintenance and cleaning the fan

You should disconnect the power before performing maintenance and cleaning of the electric fan. This will avoid accidents and equipment damage during fan cleaning. When the electric fan is working, its internal components will cycle very quickly. So it can be dangerous if you do not properly perform maintenance.

Therefore, before starting to perform maintenance, you should make sure that the power supply is disconnected. Besides, you should add a layer of protection to ensure safety. Once the maintenance has been completed, double check to make sure that everything is installed correctly. Also make sure that the electric fan is working properly before reconnecting the power supply.

2. Clean the dust on the electric fan

The next job of electric fan maintenance and cleaning is to clean the dust and dirt on the fan. To clean the dust on the electric fan, you can follow these steps:

Step 1: Use a soft cloth or a light brush to remove dirt on the surface of the fan. If the dirt is too much or clingy, you can use a stiff brush or dry cleaning kit to remove it.
Step 2: Use a mild soap solution or a special cleaning solution for electric fans to wipe away dirt remaining on the surface of the fan. You can use a cotton pad or a soft cloth to wipe it off.
Step 3: After cleaning the surface of the fan. Use a brush to clean the openings or vents on the fan to remove any remaining dirt and impurities.
Step 5: After completing the cleaning, make sure the fan is completely dry before turning the power back on and using it.

Note: It is recommended to clean the fan periodically to prevent dirt from accumulating and to help the electric fan operate more efficiently.

READ MORE: WALL FAN AND IT’S BENEFITS

3. Check the condition of the cable

When carrying out maintenance and cleaning of the electric fan, you should check the condition of the cable to ensure safety and avoid unexpected damage. Here are some steps to check the electric fan’s cable:

Step 1: Check cables and connections for loose, open or broken. If you find any signs of damage, you should replace the cable with a new one to avoid a dangerous situation.
Step 2: Check the surface of the cable for peeling, peeling or broken. If you find any signs of damage, you should replace the cable with a new one to avoid a dangerous situation.
Step 3: Check the connections of the cables and make sure they are fastened and properly attached. If the connections are not fastened or properly secured, it should be repaired or replaced to be safe.
Step 4: After completing the cable test, reconnect the power supply and test the fan to make sure it is working properly.

Note: You should check the fan’s cable periodically to ensure safety and avoid unexpected damage. If you are not sure about checking the cable, you should consult a professional technician for inspection and repair.

4. Lubricate (oil) the fan motor

Lubrication of the fan motor is very important in the maintenance and cleaning of electric fans. This will help reduce friction and prolong the life of the fan. Here are the steps to lubricate the fan motor:

Step 1: Locate the fan motor. Usually, the fan motor is located near the fan shaft.
Step 2: Use the right lubricant. You should use a lubricant recommended by the manufacturer or specifically designed for the fan motor. This will ensure that the lubricant will not harm the fan motor.
Step 3: Clean the fan shaft and fan motor head with a soft cloth and cleaning solution (if necessary).
Step 4: Take a small amount of lubricant and apply it to the fan shaft and fan motor head. Be careful not to apply too much lubricant, just a small amount is enough.
Step 5: Reassemble the fan shaft and fan motor properly. Then, restart the fan and wait a few seconds for the lubricant to spread evenly.
Step 6: Check if the fan motor is working properly or not.

Note: You should lubricate the fan motor periodically to ensure efficient operation of the fan and prolong its life. If you are unsure about lubricating the fan motor, you should consult a professional technician to do it.

5. Check fan operation

After you complete the electric fan maintenance and cleaning. You need to check the operation of the fan to make sure it is working properly. Here are the steps to check the fan operation:

Step 1: Start the fan and observe if it works properly. If the fan runs smoothly, doesn’t make any noise and doesn’t vibrate, it’s working fine.
Step 2: Check the fan speed. If the fan has multiple speeds, check all speeds to make sure the fan is working properly.
Step 3: Check the air flow of the fan. Use your hand or a sheet of lightweight material to check that the fan is generating the desired amount of wind.
Step 4: Check the tilt of the fan. Make sure that the fan is installed and properly tilted for optimal airflow.
Step 5: Check the safety of the fan. Ensure that all fan sections are properly installed and aligned. That way there is no danger to the user.
If you find any problem with the fan during the test. Stop using immediately and contact the manufacturer or technical personnel for advice and repair.

READ MORE: SIMPLE AND COST SAVING WAYS TO INSTALL A CELLING FAN

Maintenance and cleaning the fan is a must periodically to help prolong the life of the fan. Above are the shares of Tran Phat to help you do the maintenance yourself at home. When there is a need to buy a new electric fan, please contact the company immediately to buy the product at the best price: Hotline: 028.6269.5792.

FOR MORE INFORMATION PLEASE CONTACT

TRAN PHAT PRODUCTION – TRADING – SERVICE ONE MEMBER CO., LTD
🏢 346A Tan Hoa Dong, Binh Tri Dong Ward, Binh Tan District, City. HCM City
☎️ Hotline: 028 6269 5792
📧 Email: info@tranphat.net.vn
🌐 Website: https://tranphat.net.vn
🇫 Fanpage: https://www.facebook.com/congtytranphat
🗾 Maps: https://g.page/r/CaRJcQ1kHoBrEBA