Instructions on how to clean and maintain industrial fans

INDUSTRIAL FAN YANFAN is the leading prestigious brand in Vietnam, has high quality for many years continuously, YanFan products always bring good quality and save energy. The fan has a beautiful design suitable for large spaces due to the large fan capacity.

After a long time of use, industrial fans are easy to collect dust and dirt, leading to the possibility of motor wear and slow running. That is why the technical staff at Tran Phat would like to share with customers how to maintain and clean industrial fans at home simply and easily to increase the life of the fan. Readers are invited to consult.

Industrial fan models are very popular in the lives of Vietnamese people. Therefore, it is extremely necessary to use, maintain, maintain and clean the fan to increase the performance and durability of the product. Because this is a simple technique to prevent possible damage during operation to maintain equipment in the best condition. The maintenance of industrial fans helps to restore and repair the functions and operation of the fan after certain incidents and failures.

The maintenance and maintenance of industrial fans is a necessary and important thing, but most of the users in our country do not pay too much attention to this issue. Maintenance is a job that contributes to increasing the life of the equipment, ensuring the maximum performance of the industrial fan. This is a job that contributes to increasing labor productivity and working efficiency of employees, contributing to ensuring the health of users, maintaining a healthy living and working environment. In addition, the maintenance and maintenance of industrial fans will reduce the possibility of equipment failure, reduce the risk of fire and explosion affecting property and human life.

Some types of industrial fans for household use such as wall fans, standing fans, floor fans, …. after a period of use, a lot of dust will be attached to the blades and fan cages. From there, according to the wind, dirt will fly along, reducing the cooling efficiency, causing loss of aesthetics of the device, so users should clean it regularly. Right below, the technicians at Tran Phat would like to share with you how to clean and maintain a simple home industrial fan that anyone can do.

– Remove the front fan cage by removing the cage retaining ring and the locks, be careful to remember how to do so when assembling

– Turn the impeller stopper clockwise to remove the impeller, then pull the impeller out of the shaft. Usually the impeller stopper and shaft are threaded against the bolts and nuts to help the stopper tighten itself as the impeller rotates.

– Proceed to disassemble the rear fan by turning the stop ring counterclockwise.

Use a damp clean cloth to wipe off dust and dirt on the fan cage and impeller, which can be washed with water and be sure to dry. Note that during the cleaning process, do not let water get on the electronic components or the motor to avoid causing a fire.

Double check that the spindles are stiff by rotating the spindle before re-installing the fan components. In case you find that the spindle is stiff, the fan runs hot and slow, you should put a few drops of sewing machine oil on the spindle near the bearing. Then check again if the spindle is working properly. Put oil on the outside of the bearing and turn on the switch to run the fan, so that the oil is drawn into the bearing.

Proceed to install the rear fan cage first, followed by the fan blade and the front fan cage installed last, then install the lock and snap ring to hold the fan cage. Pay attention when installing the fan cage, pay attention to the handle, the words and the brand of the fan located on the top.

In general, industrial fan maintenance and maintenance measures are necessary technical methods to limit before a problem can occur, helping to reduce the risk of equipment failure. Maintenance of industrial fans is carried out periodically, in time or according to the condition of the product.

With 4 steps of cleaning and maintaining civil industrial fans that Tran Phat’s technicians shared above, they hope to help customers in the process of using the device optimally and effectively. If you are in need of buying and consulting these industrial fans, please immediately contact Tran Phat company – the address specializing in the distribution of leading industrial fans in Ho Chi Minh City. We bring to customers high quality products, long warranty, reasonable price, high durability, safety for users.