Things to know when using a Slide Fan YANFAN: Note, common mistakes

Slide fan is an indispensable cooling device in families in the summer. Although it is a familiar and frequently used product, not everyone knows how to use this device properly. That’s why you need to follow up to know about the usage notes and common errors in this fan to be able to use it for a long time.

Mục lục

Notes to know when using a slide fan

Slide fan is one of the quite popular fan lines in Vietnam. However, using it to stabilize effectively is not easy. Summer is coming and you still don’t know how to make the fan work stably and with high durability, you need to know the following notes when using:

Need to choose a suitable fan placement

The location is a very decisive factor for the operation of the slide fan, but this is something that is not noticed by many users. It is necessary to place the fan in a stable, flat position, to ensure that the fan does not shake when running.

It should be kept in a cool place, near a window, if placed near a wall, at least 1m away. Avoid windy locations, especially hot winds from outside. Because it can make the room even hotter, causing the fan motor to heat up faster.

Clean the fan regularly

The current environment is quite polluted and dusty. Even in a closed house, after only a short time, the fan was covered with a thick layer of dust. Cleaning the fan clean helps this device work better, bringing a fresh breeze. Depending on the status of dirt, you can flexibly clean the cleaning time.

Cleaning is extremely simple. With the cage and wings you can clean with a soft cloth and water. With the engine, you should clean it every 6 months, clean and add oil to the engine part, core and silver.

Adjust the running mode of the fan

The weather is hot, so it is understandable that we always use the fan in the strongest mode. However, this long-term habit makes the fan life less serious.

The correct way to use it is to leave it strong at the start. Then gradually reduce to medium and small mode. This not only helps protect the fan, but also helps us save electricity while still providing a cool feeling.

Common mistakes when using slide fan

Common errors in the process of using the slide fan

Fan does not run even though the button is turned on

This is a fairly common situation when you have plugged in and turned on the button but the device does not work. There are many causes of this condition which can be due to unstable power supply, motor overload or faulty control in the motor.

If this situation is encountered, the first thing to do is to check whether the power source, control valve, and voltage are consistent with the parameters of the device or not. If the inspection does not find any abnormalities, contact a repairman to find out the internal cause from the fan motor.

The buttons on the control panel are broken

Most of the fans use the control panel as buttons. After a long time of use, they may be damaged, so that you cannot press and control the operation as you want.

To fix this error you can try by using lubricating oil into the grooves of the button. This helps to clean rust and dirt. If the button is worn out, it needs to be replaced with a new one.

The fan fails to operate with a loud noise

The fan noise is so loud that we feel uncomfortable when using them. The cause of this condition is due to the friction between the shaft and the brass. Because after a long time of operation, this contact part is dry, even rusty. To fix it, we need to remove the engine part to apply lubricating oil to the bearings.

The fan accidentally has a hotter temperature than usual when operating

This is a situation that surely every fan user will encounter. The reason is that the fan must operate continuously at strong mode for a long time, or because the temperature is too hot. Or because the motor part has not been maintained for a long time, too dry, causing great friction, which increases heat quickly.

To fix this situation is very simple. Users only need to reduce the speed of the fan, remove the motor to lubricate. If the temperature is too high, let the fan rest for a few minutes.

Above are the notes to know and the common errors when using the fan by mistake. Hopefully with the above sharing will help you use this cooling device for the longest time.