Instructions for cleaning industrial fans with 4 basic steps

The industrial fan you are using has the phenomenon of dirt sticking. Fan blades, fan cages, fan bodies… dust everywhere. And it gives you a very uncomfortable feeling. The wind is no longer as strong as before, accompanied by the smell of dust. It’s time to learn the instructions for cleaning industrial fans to make it clean.

1. Instructions for cleaning industrial fans properly 

The guide to cleaning industrial fans properly will help you know how to clean the fan. The dirt will be removed and you will have a fan that looks like new and the wind is cooler. Cleaning is performed sequentially according to the following steps:

Remove the fan cage and propeller

• Remove the front fan cage: This is the easiest part to remove in a fan. You just need to remove the bracket that holds the fan cage and remove the buckles to be able to lift the fan cage.
• Remove the propeller: You turn the propeller stopper clockwise and remove the propeller from the axis of rotation. The cover of the impeller and shaft are reverse-threaded with bolts and nuts. This keeps the impeller stopper tightly secured to the blade as the fan rotates.
• Remove the rear fan cage: Rotate the plastic stopper counterclockwise to remove the rear fan cage from the fan.

Carry out cleaning and cleaning of the fan cage and impeller

The next step in the instructions for cleaning industrial fans is to clean the fan cage and impeller. Use a clean cloth to wipe off all the dirt on the cage and fan blades. If it is too dirty, you can wash it with water mixed with detergent, then dry with a towel. You can also dry it yourself, but it will take a long time.

Note: In the process of cleaning and cleaning the fan, absolutely do not let small water into the components. If it is unfortunate to let water in, it will cause the links to get wet and cause a fire, leading to fan failure.

Spindle maintenance

After cleaning the fan parts, before reinstalling them. You need to check if the spindle is stiff or not. This is a pretty important step in the industrial fan cleaning guide. If you use your hand to rotate the shaft and feel the shaft is stiff, you need to add more oil to the shaft. Because when the shaft is stiff, the fan will rotate slowly, the wind is not cool, and at the same time consumes a lot of power.

Apply oil where the shaft is in contact with the bearing. You keep small on the outside of the bearing, then plug in the fan to run the oil will slowly flow into the inside of the bearing. Then you check again to see if the fan is working properly or not.

Install the parts back to their original positions

Finally, you proceed to install the disassembled parts back to their original positions. The first is the rear fan cage, although it is removed last, but when installing, you need to install it first. Next is to install the propeller on the shaft and then install the fan cage first and the fan protection circle.

2. Notes when cleaning industrial fans

So to clean the dust on the industrial fan is not too difficult. You just need to follow the instructions for cleaning industrial fans properly, but when cleaning the fan, you need to pay attention to a few things as follows:

• The power supply must be completely disconnected before cleaning the fan. This not only helps protect your safety but also ensures the safety of the electric fan.
• Cleaning the fan needs to take place in the correct sequence. Especially when putting parts back together, doing it wrong will cost you more time to redo. Remember which part is removed last, then put in first. Repeat this until the first part is removed.
• Absolutely do not let water get into the fan components. If this happens, the fan will burn out when plugged into the power source.
• Industrial fan cleaning needs to be done regularly and in accordance with industrial fan cleaning instructions. This not only keeps the fan looking as clean as new. More importantly, it helps the fan to operate smoothly, normally creating fast and cool wind. It also helps prolong the life of the product.
• Disassembled parts need to be kept separately in order. Especially with the fan cage lock, or screws, need to be carefully preserved, if lost, it will make installation more difficult.
• When plugging the fan back into operation, if there is a burning smell, immediately disconnect the power supply and take it to repair. If you deliberately let the fan operate, it will lead to fan damage.

Through here you know how to clean industrial fans yet. This civil instructions for cleaning industrial fans can be applied to some other types of fans. When you need to clean box fans, table fans, mezzanine fans, industrial standing fans can completely apply these steps.

See more: Revealing 5 mistakes to avoid when using Yanfan industrial fans

 

FOR MORE INFORMATION PLEASE CONTACT

TRAN PHAT PRODUCTION – TRADING – SERVICE ONE MEMBER CO., LTD
🏢 346A Tan Hoa Dong, Binh Tri Dong Ward, Binh Tan District, City. HCM City
☎️ Hotline: 028.5407.7633 – 28.62695792
📧 Email: tranphat@yanfan.com.vn
🌐 Website: https://tranphat.net.vn
🇫 Fanpage: https://www.facebook.com/congtytranphat
🗾 Maps: https://g.page/r/CaRJcQ1kHoBrEBA