Today’s ventilation fan is a product that is no longer too strange to consumers. The product helps to absorb and remove all kinds of dirt in the air, and at the same time, sucks and pushes hot air out of the room. If you are looking to buy this type of product, please refer to the 4 fan models below.
Mục lục
1. Yanfan HL300 . ventilation fan
Yanfan HL300 ventilation fan has a simple design with a square shape. The fan measures 34cm wide and 10.5cm deep. The fan is made from delicate and elegant white ABS plastic. This color scheme is very suitable for the color of the walls. Therefore, when installed, it forms a homogeneity with the interior space.
The wing of the fan is white, similar to the color of the fan mesh. The 6-leaf propeller is shaped like an elephant’s ear and is 30cm in diameter. Protecting the outside of the propeller is a fan mesh made of plastic. The fan grid is made up of spokes with small and even spacing.
The fan is designed with the ability to suck, push 2-way with the ability to clean or blow away all odors, moldy gases in the air. And the fan can work best in a room with a maximum area of 38m2. Therefore, before choosing a fan, you need to carefully calculate the area of the room. If the room area is larger than 38m2, the effect is not optimal.
READ MORE: WHY SHOULD BUY YANFAN STANDING FAN D1868
2.Yanfan HL250 . wall exhaust fan
This Yanfan HL250 wall exhaust fan is smaller in size than the HL250 model. The product has a size of 28.5cm × 28.5cm × 8.5cm and the operating capacity is only 30cm. Therefore, the performance is also lower. The product can only absorb / push odors, mold and dust in the room with an area of 30m2. So if your room has an area larger than 30m2, you should choose a product with a higher capacity.
The fan is designed for wall mounting and has a white color similar to the color of the wall. So when appearing in the living space, it does not reduce the aesthetic value of the room. On the contrary, it adds elegance and elegance to your space.
How to use this Yanfan HL250 wall exhaust fan is quite simple. On the fan body is integrated 1 wire connected to the motor. This wire is to control the operation of the fan. When you pull one, it works and conducts vacuuming and vacuuming. You pull one more, the fan will push the air out and when you pull the 3rd fox, it will stop all fan operation.
3.Yanfan HL200 . wall exhaust fan
If your room has an area of about 23m2 or less, choose the Yanfan ventilation fan HL200. The product has a small size, only 20.5cm wide and 8cm deep. The fan operates with a low power of 28W, so it can only clean the air for a room with an area of 23m2.
The fan is designed to be able to suck and push in two directions, so it is very convenient. The fan operates quietly with a capacity of 28W and does not make noise, so if you do not pay attention you will not feel the fan is working. The effect of the product is to make the air clean and fresh. When odors, mold and dust, hot air is removed. Human health will be more guaranteed.
4.Yanfan HL150 wall exhaust fan
Compared to the HL200 wall exhaust fan model, this HL150 ventilation fan model has a lower operating capacity. The power of the fan is 25W, so the ability to suck / push odors, gas, and dirt will not be as strong as the previous product. The fan can work effectively for a room with an area of 15m2. So you need to keep this in mind when deciding to choose Yanfan HL150 exhaust fan.
In terms of design, this fan has no difference with the previous design. The fan is still made from white plastic, the propeller is still divided into 5 leaves shaped like elephant ears. And to control the operation of this fan, we have to pull the second integrated with the fan body. When jerking a fan works and sucks in, jerks the second one out, pulls it out the third time, turns off the fan.
You are looking to buy a good quality ventilation fan. These 4 products are the best choice for you. Contact Tran Phat at Hotline 028.5407.5718 for the most detailed advice on products.
FOR MORE INFORMATION PLEASE CONTACT
TRAN PHAT PRODUCTION – TRADING – SERVICE ONE MEMBER CO., LTD
🏢 346A Tan Hoa Dong, Binh Tri Dong Ward, Binh Tan District, City. HCM City
☎️ Hotline: 028.5407.7633 – 28.62695792
📧 Email: info@tranphat.net.vn
🌐 Website: https://tranphat.net.vn
🇫 Fanpage: https://www.facebook.com/congtytranphat
🗾 Maps: https://g.page/r/CaRJcQ1kHoBrEBA