Instructions for cleaning box fans properly

When the box fan is dirty, it will be very difficult to clean. Unlike table fans, mezzanine fans or hanging fans. Disassembling the box fan will be more difficult. But that’s only if you don’t know how. Follow this simple, instructions for cleaning box fan and you’ll know how to clean your fan.

Mục lục

1.Why should you clean the box fan?

The box fan will be dusty and dirty after a period of use. You can easily see that the blade is dirty with the naked eye. The fan cage, fan blades and other parts of the fan will be covered with dirt. Therefore, it is necessary to see the instructions for cleaning box fans those parts.

Clean the box fan regularly to prolong the life of the fan

The dirty fan not only detracts from the aesthetic value of the fan. If the fan is stuck with dirt for a long time, it is also the cause of the fan not producing cool wind. All fan operations are not as smooth and efficient as the original. If you do not clean all the dirt on the fan for a long time, it will also cause power loss. Thereby reducing the life of the fan and affecting the daily activities of family members.

2.Instructions for cleaning box fans properly and safely

Before proceeding to clean the box fan, you need to prepare some tools in advance. This is to help you in the instructions for cleaning box fans. Prepare the following tools:

A basin of clean water and a soft cloth to clean the fan cage.
A screwdriver is used to disassemble fan parts.
1 duster, 1 pack of cotton swabs needed to clean the crevices that the wipes can’t get into.

Everything is fully prepared, then you proceed to clean the fan according to the following box fan cleaning instructions:

2.1. Disassembling the box fan parts

Please unplug the fan from the power source. It is necessary to disconnect the power supply to ensure safety during fan cleaning. Place the fan on a flat surface for easier operation. Place a sheet of paper under the fan to prevent dust from falling onto the floor.

Next you disassemble each part of the fan. Remove the front fan cage first. The front fan cage is quite easy to remove, you just need to remove the blocking cover in the center of the fan cage to remove the fan cage. To remove the rear fan cage, you must use a screwdriver. When you can remove the rear fan, you will proceed to remove the propeller.

2.2. Cleaning cages and propellers

The cage and fan blades can be removed from the fan box, you can use water to wash it to make it clean faster. Then use a dry cloth to wipe or dry. As for the fan body, use a cleaning brush to wipe off all the dirt, in the crevices the brush can’t get in, use a cotton swab. Use a damp cloth to wipe again until the body of the box is completely clean.

2.3. Cleaning the motor of the box fan

Often users forget to clean the fan motor. But according to the box fan cleaning instructions, the motor also needs to be cleaned. Because dirt will also stick to the engine. If you do not clean it to get too dirty, the engine will not be able to operate.

You use a brush and cotton swab to clean the motor part of the fan. After cleaning, use machine oil to lubricate the shaft of the fan. This will help the fan operate more smoothly.

2.4. Reassemble the fan components as they were

After cleaning the fan parts, you proceed to install those parts. The wing will be installed first, followed by the rear cage of the fan, and finally the front cage.

So it just takes a little time and performs a few simple operations. So you have cleaned your fan already. The fan after being cleaned is not only clean and aesthetically pleasing, but also works better. Wind speed faster, cooler.

3.Note when cleaning the box fan

In the process of cleaning the fan according to the instructions for cleaning box fans, you need to note a few things below.

Please choose a very flat and dry location when disassembling the fan.
In the process of cleaning, cleaning and washing the fan parts, avoid letting water get into the motor. If water falls into the motor, it is easy to cause a fire when the fan is plugged in again.
When removing screws need to be in a safe place, to avoid falling or confusion.
Test run the fan after cleaning, if you see an abnormal noise or a burning smell, unplug the fan immediately from the power source.

Cleaning the box fan is not too difficult, nor does it take too much time. You can do the cleaning yourself at home in your free time. So follow the instructions for cleaning box fans to keep the fan looking new and prolong the life of the fan.

See more: Top 3 best-selling AKiFan box fans in October

FOR MORE INFORMATION PLEASE CONTACT

TRAN PHAT PRODUCTION – TRADING – SERVICE ONE MEMBER CO., LTD
🏢 346A Tan Hoa Dong, Binh Tri Dong Ward, Binh Tan District, City. HCM City
☎️ Hotline: 028.5407.7633 – 28.62695792
📧 Email: tranphat@yanfan.com.vn
🌐 Website: https://tranphat.net.vn
🇫 Fanpage: https://www.facebook.com/congtytranphat
🗾 Maps: https://g.page/r/CaRJcQ1kHoBrEBA